Luken

Luca Nadotti

Steam profile settings.gg crosshair history

800 DPI4000 Hz1280x9604:3

Crosshair new system

960p pixels, enlarged

cl_crosshairstyle 4; cl_crosshair_length 2; cl_crosshair_thickness 2; cl_crosshair_gap 1; cl_crosshairdot 0; cl_crosshair_t 0; cl_crosshair_drawoutline 0; cl_crosshair_recoil 0; cl_crosshaircolor_r 255; cl_crosshaircolor_g 255; cl_crosshaircolor_b 255; cl_crosshaircolor_a 255; cl_ironsight_usecrosshaircolor 0; cl_ironsight_dot_scale 1; cl_crosshair_screen_height 960

Converted from the pre-patch crosshair settings.gg lists for Luken to CS2's crosshair system since the Sept 22, 2026 update, authored at 960p, Luken's resolution; CS2 rescales it to your resolution. Many pros rebuilt their crosshair after the update, so this may not be what Luken uses now — see their crosshair history.

Valve published no conversion formula. This uses a community reconstruction (small-indie-crosshair-company v0.19.1, model community-static-v11, CS2 build 2000922); for Static Cross at 1080p and 960p it agrees with the rule crosshairrestore.com measured from in-game screenshots (CS2 builds before Sept 30), and nothing else has been checked against captures.

The paste sets every setting that shapes this crosshair, including the iron-sight dot (CS2's defaults where their config has no value), so nothing from your current crosshair carries over.

Full config 3 parts

Download .cfg

The CS2 console can reject a pasted line longer than 510 characters, so the full config comes in parts: press ~ in CS2, paste part 1, press Enter, then do the same with the next part. Or download the .cfg, save it in Counter-Strike Global Offensive/game/csgo/cfg/ and run exec luken in the console.

Part 1 · Crosshair

cl_crosshairstyle 4; cl_crosshair_length 2; cl_crosshair_thickness 2; cl_crosshair_gap 1; cl_crosshairdot 0; cl_crosshair_t 0; cl_crosshair_drawoutline 0; cl_crosshair_recoil 0; cl_crosshaircolor_r 255; cl_crosshaircolor_g 255; cl_crosshaircolor_b 255; cl_crosshaircolor_a 255; cl_ironsight_usecrosshaircolor 0; cl_ironsight_dot_scale 1; cl_crosshair_screen_height 960

Part 2 · Mouse, viewmodel & radar

m_yaw 0.022; sensitivity 0.9; zoom_sensitivity_ratio 1; viewmodel_fov 68; viewmodel_offset_x 2.5; viewmodel_offset_y 0; viewmodel_offset_z -1.5; cl_radar_scale 0.4; cl_radar_rotate 1; cl_hud_radar_scale 1; cl_radar_icon_scale_min 0.6; cl_radar_always_centered 1; cl_radar_square_with_scoreboard 1

Part 3 · HUD & other

safezonex 1; safezoney 1; hud_scaling 0.9; cl_hud_color 1; fps_max 0; cl_showloadout 1; r_fullscreen_gamma 1.9

Convars CS2 renamed are renamed, values outside CS2's range are set to the nearest one it accepts, and convars CS2 doesn't have or that are cheat-protected are left out (see Adapted for CS2 below).

Mouse & Sensitivity sensitivity

m_yaw 0.022; sensitivity 0.9; zoom_sensitivity_ratio 1

DPI & polling rate are set in your mouse software, not in-game. Recommended: DPI 800 · eDPI 720 · polling 4000 Hz

Viewmodel viewmodel_*

viewmodel_fov 68; viewmodel_offset_x 2.5; viewmodel_offset_y 0; viewmodel_offset_z -1.5

Radar cl_radar_*

cl_radar_scale 0.4; cl_radar_rotate 1; cl_hud_radar_scale 1; cl_radar_icon_scale_min 0.6; cl_radar_always_centered 1; cl_radar_square_with_scoreboard 1

HUD hud_*

safezonex 1; safezoney 1; hud_scaling 0.9; cl_hud_color 1

Performance & Other misc

fps_max 0; cl_showloadout 1; r_fullscreen_gamma 1.9

Misc convars (fps caps, gamma, gameplay toggles) captured from this player's config.

Adapted for CS2 4

hud_scaling 0.8 is outside CS2's range, set to 0.9
cl_radar_size doesn't exist in CS2, left out
setting.defaultres is a video setting, set in Settings → Video (see Video settings), left out
setting.defaultresheight is a video setting, set in Settings → Video (see Video settings), left out

Launch Options Steam

-allow_third_party_software -noreflex +fps_max 0

Steam → right-click Counter-Strike 2 → Properties → Launch Options → paste.

Video settings manual

Video settings
Brightness	103%
Scaling mode	Stretched
Aspect Ratio	4:3
Resolution	1280x960
Display Mode	Fullscreen

Advanced video
Boost Player Contrast	Enabled
V-Sync	Disabled
Multisampling Anti-Aliasing Mode	4x MSAA
Global Shadow Quality	Low
Model / Texture Detail	Low
Texture Filtering Mode	Bilinear
Shader Detail	Low
Particle Detail	Low
Dynamic Shadows	All
Ambient Occlusion	Disabled
High Dynamic Range	Quality
FidelityFX Super Resolution	Disabled (Highest Quality)
NVIDIA Reflex Low Latency	Disabled

CS2 doesn't allow these via console commands — set them in Settings → Video. For stretched scaling also configure your GPU driver panel (or use the resolution launch options below).

Original autoexec.cfg pre-patch

Download original

Show original config file

"m_yaw" "0.022"
"fps_max" "0"
"safezonex" "1"
"safezoney" "1"
"hud_scaling" "0.8"
"sensitivity" "0.9"
"cl_hud_color" "1"
"cl_radar_size" "1"
"viewmodel_fov" "68"
"cl_crosshair_t" "false"
"cl_radar_scale" "0.4"
"cl_showloadout" "true"
"cl_crosshairdot" "false"
"cl_crosshairgap" "-4"
"cl_radar_rotate" "1"
"cl_crosshairsize" "1"
"cl_crosshairalpha" "255"
"cl_crosshaircolor" "5"
"cl_crosshairstyle" "4"
"cl_hud_radar_scale" "1"
"r_fullscreen_gamma" "1.9"
"setting.defaultres" "1280"
"viewmodel_offset_x" "2.5"
"viewmodel_offset_y" "0"
"viewmodel_offset_z" "-1.5"
"cl_crosshair_recoil" "false"
"cl_crosshaircolor_b" "255"
"cl_crosshaircolor_g" "255"
"cl_crosshaircolor_r" "255"
"cl_crosshairusealpha" "true"
"cl_fixedcrosshairgap" "3"
"cl_crosshairthickness" "1"
"zoom_sensitivity_ratio" "1"
"cl_radar_icon_scale_min" "0.6"
"cl_crosshair_drawoutline" "false"
"cl_radar_always_centered" "1"
"setting.defaultresheight" "960"
"cl_crosshair_outlinethickness" "0.5"
"cl_crosshair_dynamic_splitdist" "3"
"cl_crosshairgap_useweaponvalue" "false"
"cl_radar_square_with_scoreboard" "1"
"cl_crosshair_dynamic_maxdist_splitratio" "1"
"cl_crosshair_dynamic_splitalpha_innermod" "0"
"cl_crosshair_dynamic_splitalpha_outermod" "1"

The autoexec.cfg exactly as settings.gg serves it, in the format from before the Sept 22, 2026 update: its crosshair settings no longer work in CS2, so don't exec it — use the converted commands or .cfg above.